Windows xp system file protection

As the parameter's name implies, this type of scan will only happen once. Subsequent system boots will occur normally without SFC running. Both of these commands replace incorrect system files as necessary and may require you to provide copies of the correct file versions.

As you can imagine, this would really increase the amount of time that it takes the computer to boot up. Eventually, you may get tired of these long boot times and want to disable the SFC. Earlier I explained that Windows uses a cache folder to store backup copies of the correct version of the various system files. This command will also cause Windows to start scanning the various protected files and will rebuild the cache while doing so. Of course, this may mean that you'll have to provide Windows with the Windows installation media or copies of updated system files.

There is actually a lot of contradictory information about the default cache size. While researching this article, I found three different Microsoft Knowledgebase articles that specified three different default cache sizes.

One article suggested that the default cache size was 50 MB, while another suggested that the size was MB. Still another indicated that the size was unlimited. There are several different registry keys that you can modify in order to control the behavior of WFP.

Some of these keys are directly manipulated every time you run SFC. Others have lower-level functions, such as specifying the location of the file cache or of the installation files.

Modifying the registry can be dangerous. Therefore, I strongly recommend creating a full backup before attempting any of the techniques outlined in this section. This will open the Registry Editor. Normally, the WinLogon portion of the registry is used to control various boot options. This setting enables SFC.

Normally you won't want to change this value. However, you can change the value from 0 to 4 to leave SFC enabled but to disable the popups. You may only disable SFC if you have a kernel debugger hooked up. If you are using a kernel debugger, you can change the registry key's DWORD value to 1, which will disable SFC and then prompt you on all subsequent boots as to whether you want to reenable it. This option disables SFC at the next boot only.

The default value is 0. This value indicates that protected files should not be scanned at boot up. Changing the assigned DWORD value to 1 indicates that protected files should be scanned on every boot. You can download EMET 4. Making users log in to standard, nonadministrator accounts makes it possible to mitigate the overwhelming majority of the risks of running Windows XP at a single stroke.

In larger organizations, privilege management software can be used to control user accounts and elevate privileges when necessary. Autorun can be re-enabled if necessary by running Microsoft Fix it Malicious code may be placed in these parts of memory during a buffer overflow attack, and an attempt may subsequently be made to execute it from this location. If a particular application becomes unstable with DEP turned on, you can selectively disable DEP for that application. Support for Microsoft Office and earlier has been discontinued along with support for the Windows XP operating system.

To minimize the chances of a Windows XP machine being compromised through Office, you should upgrade to a later version of Office or use an alternative product such as the open source LibreOffice.

Windows XP may not be updated anymore, but it does have some defenses. I want to automatically replace a driver with my created driver. Now I need to temporarily disable WFP and turn it on after changing driver. You can tell me another way to disable it. It can help me too. Any ideas? It cannot be done as silently as you were probably hoping for, mainly because of the debugger requirement:.

Important: You must have a kernel debugger attached to the system via null modem cable for example:Ikd. Windows File Protection is not active on this system. Would you like to enable Windows File Protection now? This will enable Windows File Protection until the next system restart. Clicking Yes will reactivate WFP until the next system restart. This message will appear at every successful logon until SFCDisable is set to 0. See here. Have you considered using devcon or, better yet, pnputil to load your driver from the command line?

Sign up to join this community. The best answers are voted up and rise to the top. Stack Overflow for Teams — Collaborate and share knowledge with a private group. Create a free Team What is Teams? Learn more. Ask Question.